Why Regular Emergency Lighting Testing Matters
During an emergency, occupants need to be able to find their way out of a building safely.
If the normal lighting supply fails, emergency lighting helps illuminate escape routes, exits and important safety equipment.
However, emergency lights can only provide that protection if they are working correctly.
What Is Emergency Lighting?
Emergency lighting is designed to operate when the normal lighting supply is interrupted.
Depending on the premises, emergency lighting may help illuminate:
- Escape routes
- Corridors
- Stairways
- Changes in floor level
- Emergency exits
- Fire alarm equipment
- Firefighting equipment
- Open areas
Exit signs may also be illuminated so occupants can quickly identify the direction of escape.
Why Does It Need Testing?
Emergency lighting equipment may spend most of its life operating in standby mode.
A fault may therefore go unnoticed unless appropriate testing and maintenance arrangements are in place.
Common problems can include:
- Failed lamps
- Battery deterioration
- Damaged fittings
- Poorly positioned lighting
- Obstructed signs
- Equipment that no longer operates for the required duration
Regular testing helps identify these problems before an emergency occurs.
Buildings Change Over Time
Even if the original emergency lighting installation was suitable, the building itself may change.
Partitions may be added, rooms repurposed or escape routes altered.
Furniture, storage or equipment can also block signs or lighting that was previously clearly visible.
That is why emergency lighting should be considered as part of the premises’ wider fire safety arrangements rather than treated as something that can simply be installed and forgotten.
Keep Records of Testing and Maintenance
Keeping appropriate records can help businesses demonstrate that emergency lighting is being managed.
Records can also make it easier to spot recurring faults or identify equipment approaching the end of its useful life.
Professional servicing can complement the routine checks carried out by the person responsible for fire safety within the premises.
Organise access and responsibilities
Find out who manages the agreed testing programme and how staff should report concerns between visits. Where rooms are locked or an escort is needed, arrange access in advance. Explain any changes to working hours or occupied areas to the specialist responsible for the system. This helps the visit reflect the way the building is actually used.
Keep the testing arrangements with the equipment schedule or lighting plan where available. A clearly identified fitting is easier to discuss than an entry saying light broken. Staff should describe what they observed without attempting repairs or opening equipment outside their competence.
Follow a fault through to completion
When a problem is recorded, identify who will arrange advice or work and how completion will be confirmed. Keep the service report or repair information beside the original entry. During a management handover, show the next contact where the logbook is stored and which items remain unresolved. That continuity helps your testing records remain useful after the appointment has finished.
An accessible record helps the next person understand the system’s history. Our emergency lighting logbook guide explains useful references and fault entries. Refer to Scottish Fire and Rescue Service business guidance for wider fire safety management information, and ask your specialist about the programme appropriate to your installation.
Emergency Lighting Support from OnGuard
OnGuard Fire Protection can help businesses maintain effective fire safety arrangements, including emergency lighting requirements alongside other fire protection services.
For organisations operating from several premises, servicing can also be coordinated across multiple locations.
Have questions about your emergency lighting? Contact OnGuard Fire Protection for practical advice and servicing support.



